SKU: 7894 Category:

For hi-speed automation of sliding gates weighing up to 250 kg or up to 8 m long, for residential and industrial applications.

24 Vdc electromechanical gear motor.

Ideal for intensive use, with opening and closing speed up to 44 cm/s.

For instance, opening a 4 m gate takes around 10 seconds.


thanks to the Nice BlueBUS technology, the control unit can be connected to up to seven couples of photocells, control, security and signalling devices, using two wires only.


the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside Robus.


the temperature sensor adapts the motor power to the climatic conditions and at the same time thermal cut-out.
A master/slave selection automatically synchronises two motors.
This means it is possible to automate 2-leaf sliding gates set opposite each other.


thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.


acceleration and deceleration can be adjusted at the beginning and at the end of each opening and closing manoeuvre.


base and release in pressure die cast with easy to open handle.

Very quiet:

gear motor on bearings.

Power supply (Vac): 230
Absorption (A): 2.1
Power (W): 430
Speed (m/s): 0.4
Force (Nm): 310
Work cycle (cycles/hour): 50
Protection level (IP): 44
Working temp. (°C): -20 ÷ +50
Dimensions (mm): 330x195x277 h
Weight (kg): 8
Scroll to Top